D400

D400 - D400

The me-d400 is a high power RF transceiver designed for use in Mobitex network applications.

  • Proven reliability in vehicle and static applications
  • Automatic TX power to 10Watts
  • MISSION critical Data only application
  • Fully CE and VCA vehicle certified
  • Use in public transport and traffic signal management systems and ATM’s etc
  • I/O’s for switching and monitoring and remote control
  • Public & Private networks
  • Extensively used in the Emergency Service sector

me-d400 is sold throughout the world where Mobitex networks are already established and a proven success. To find out more about Mobitex public networks or establishing a private network contact sales@Mobile-Expertise.co.uk.

Accessories

Specifications

General  
Frequency range: 405 to 465 MHz Transmit and Receive
Channel spacing: 12.5kHz
RF Output 10W max +/-2dB
Modulation Modified GMSK
  F1D
Interfaces: DC, RS232 by 9 pin D-type, Data input/output by 25 way D-type
  RF by TNC female
Electrical  
Power supply: 12VDC nominal, 10.8VDC minimum, 15.6VDC maximum
Current consumption: TX 2.6A at 10W output, 1.8A at 5W, 0.9A at 1W
RX 180mA RS232 9 pin D-Type (230mA using 25way D-Type)
Values based on 12V
Transmitter  
Carrier power: 0.1 - 10W software controlled
Receiver  
Sensitivity (1 in 100 bit error rate): <-113dBm (nominal) , <-110dBm (extreme)
Channel switching time: <30mS
RSSI / Signal strength indication: -113dBm to -63dBm
Environmental  
Operating temperature: -30 deg C to +60 deg C
Enclosure: IP54 rated

Specifications are subject to change without notice and range will vary depending on the topography and the surrounding environment. Figures above are typical and measured under normal operating conditions. As such they will not form part of any contract. Our policy is one of continuous improvement and we reserve the right to change product specifications without notice.

Resources