ARF33
The ARF33 enables two-way half duplex wireless data transmission over a range of 500m
It integrates a 10-channel radio transceiver, a digital processing unit and a wide power supply range on the same board.
It is available as an IP65 enclosure ready for approved use.
This modem uses the 433/434MHz band according to the European Directive RTTE EN300-220/EN301-489 and is approved.
Data transfer in transparent mode is preformed via an RS232 serial port.
Configuration is performed by AT commands.
It covers most short-distance wireless data transmission applications, from remote meter reading type point to point transmission to constitution of cordless multi-point local networks, in sector of activity such as automation, robotics and remote management...
Visit the Adeunis-RF website
Accessories
Specifications
| General | |
| RF | |
| Programmables frequencies | 433.125 to 434.700MHz |
| Radiated RF power | 10mW (10dBm) |
| Sensitivity | -100dBm |
| Number of channels | 10 |
| Modulation | FSK |
| Data rate | 10Kbits/s |
| Modem interface | |
| Wired transmission rate | 9.6kbps |
| Serial ports | RS232 |
| Flow control | None |
| Set up & configuration | Through AT commands |
| Modes | Transparent |
| General information | |
| Supply Voltage | 8 to 40V |
| Rated consumption | 50mA (under 24V) |
| Operating temperature | -30 / +70°C |
| Range | 500m on open field |
| Size | 145 x 100 x 40mm + 170mm antenna |
| Packaging | IP65 box |
| Standard compliance | EN300-220 / EN301-489 (full certified modem) |
