The TS-D200 range of 5W UHF and VHF modems provide global solutions opening up a world of opportunity to your voice or data application or M2M service.
Designed to be small and compact the TS- D200 range offers great flexibility wherever wireless data or voice communication is needed.
The modems are:
- Environmentally tested to resist water and dust ingress
- CE certified and E marked for Vehicle use
- Low current consumption with controllable sleep command
- Low maintenance with full service support
The TS-D200 is ideal for wireless applications requiring simplicity and low cost e.g. M2M interrogation, simple remote switching, alarm signaling and gate entry systems. The TS-D200 and makes an ideal primary or fallback bearer for you communication needs.
Mobile Expertise Global prides itself on a reputation for product quality, design and performance. We make customer service a top priority and offer easy access to technical help and provide helpful and friendly service at every stage.
Product Specification
General | |||
|
|||
Performance Specifications |
R & TTE Directive 1999/5/EC ETSI EN 300-113-2 ETSI EN 300-489-5 |
BS EN 60950-1 BS EN 50371 E11 024663 / e11 034663 |
|
|
|||
Frequency range: | D200 VHF2: 146 - 174 MHz | ||
|
|||
D200 UHF1: 400 - 440 MHz | |||
D200 UHF2: 440 - 480 MHz | |||
Full switching bandwidth | |||
|
|||
Number of channels: | 16 channels, dip switch or serial command selectable | ||
|
|||
Channel spacing: | 12.5kHz, 20kHz or 25kHz all programmable | ||
|
|||
Operation: | Half Duplex | ||
|
|||
PLL step: | 5.0 / 6.25kHz | ||
|
|||
Antenna impedance: | 50 Ohm | ||
Antenna connector: | BNC (female), GPS Antenna SMA | ||
Weight: | 260g | ||
Mounting: | By four M3.5 holes | ||
Interfaces: | 15 pin d-type (female) | ||
|
|||
Electrical | |||
|
|||
Power supply: | 12V dc nominal (+9V to +18V dc acceptable) | ||
|
|||
Current consumption: |
1.5A @ 5W, 0.5A @ 1W 7mA Enhanced power save mode (sleep) |
||
|
|||
Transmitter | |||
|
|||
RF output power: | 1W - 5W programmable (low/high default) | ||
|
|||
Audio sensitivity (voice): | 6 - 8mV rms @ 60% peak deviation | ||
|
|||
Data inputs: |
100 - 120 mV rms (external modulation) TTL (POCSAG) levels 350mV rms (unfi ltered external modulation) RS232 levels (with GMSK or FFSK modem fi tted) |
||
|
|||
Modulation: |
Direct FM (FSK) / PM (voice) F3E / G3E |
FFSK / GMSK (option) F2D /& F1D |
|
|
|||
Receiver | |||
|
|||
Receiver sensitivity voice: |
12dB SINAD UHF: Better than 0.35μV or -116dBm VHF: Better than 0.28μV OR -118dBm |
||
Receiver sensitivity data: |
UHF: Better than 5.00μV or -113dBm VHF: Better than 0.28μV OR -118dBm |
||
|
|||
Receiver sensitivity (FFSK): | -113dBm <1% BER (2400 at 25kHz channel spacing) | ||
|
|||
Audio output (speaker): | 1V rms @ 8 ohms | ||
Data output: | 200 - 300mV rms | ||
|
|||
Environmental | |||
|
|||
Operating temperature: | -30 deg C to +60 deg C | ||
Storage temperature: | -40 deg C to +85 deg C | ||
|
|||
Enclosure: | IP54 rated | ||
|
Specifications are subject to change without notice and range will vary depending on the topography and the surrounding environment. Figures above are typical and measured under normal operating conditions. As such they will not form part of any contract. Our policy is one of continuous improvement and we reserve the right to change product specifications without notice.

Product Documents
Specification and Resource documents are available to download as PDF's. If you do not have acrobat reader it is free and can be downloaded from Adobe here: http://get.adobe.com/reader/